| EMERGENCY TELEPHONE NO.: 800-424-9300
PRODUCT NAME:
FABRIC
SEAL ™ (N) FIRE RETARDANT by Flame Seal
®
CHEMICAL FAMILY: Aqueous-based fire
retardant.
HMIS CODES: Health:1, Flammablity:0, Reactivity:0, PPE: B
SECTION I -
PRODUCT
INFORMATION
MANUFACTURER'S NAME:
FLAME
SEAL PRODUCTS, INC.
4025 WILLOWBEND BLVD. #310
HOUSTON, TX 77025 USA
TELEPHONE # FOR INFORMATION:
713-668-4291
SECTION II -
HAZARDOUS
COMPONENTS
| COMPONENT |
|
ACGIH |
OSHA |
| CAS REGISTRY NO. |
WT. % |
TLV |
PEL |
| Sodium Bromide |
2% - 5% |
Not Established
|
Not Established |
Boric Acid
10043-35-3 |
. 5% -
2% |
10 mg/m3
|
Cal OSHA PEL 10mg/m3
Osha PEL (Total Dust) 15mg/m3
Osha PEL (Respirable Dust) 5mg/m3 |
SECTION III - PHYSICAL PROPERTIES
APPEARANCE AND ODOR: Odorless, colorless liquid.
MOLECULAR WEIGHT: Not Applicable.
BOILING POINT: (DEGREES FAHRENHEIT): 212 - N/A
MELTING POINT: (DEGREES FAHRENHEIT): Not Applicable.
VAPOR PRESSURE: (mm of Mercury): Not Determined.
SPECIFIC GRAVITY (WATER=1): 1.05 – 1.1
VAPOR DENSITY (AIR=1): Aqueous mixture not determined.
PERCENT VOLATILE: (BY WEIGHT): 88% max. (water content only)
pH: 5.5 – 7.0
SOLUBILITY IN WATER: Complete.
EVAPORATION RATE: (BUTYL ACETATE=1): Not Determined < 1 (slower).
STORAGE:
Temperature- 40-90
°F,
(4.44°C-32.22°C) , Time
– 1 Year from Manufacturer Date
SECTION IV - FIRE AND EXPLOSION DATA
FLASH POINT (DEGREES FAHRENHEIT: PENSKY-MARTENS CLOSED CUP):
None to boiling.
FIRE EXTINGUISHING MEDIA: Not combustible. Use water spray, fog, foam, dry
chemicals, CO2, or other agents as appropriate for material in surrounding fire.
FLAMMABLE LIMITS (PERCENT BY VOLUME): Not applicable.
SPECIAL FIRE FIGHTING PROCEDURES AND EQUIPMENT: Not combustible.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None.
HAZARDOUS DECOMPOSITION PRODUCTS: Exposure to high heat and/or combustion
may cause liberation of traces of ammonia.
SECTION V -
REACTIVITY DATA
STABILITY:
STABLE ___X___
UNSTABLE _______
CONDITIONS TO AVOID:
Mixing & strong bases; Mixing with incompatible materials.
INCOMPATIBILITY (MATERIALS TO AVOID): Strong bases may release ammonia gas.
HAZARDOUS DECOMPOSITION
PRODUCTS: In the dried state, nitrogen oxides, ammonia or hydrogen bromide may be formed in the presence of fire.
HAZARDOUS POLYMERIZATION:
Will Occur _______
Will Not Occur ___X___
SECTION VI - HEALTH HAZARD INFORMATION
EXPOSURE FROM ROUTINE USE: No evidence of adverse effects from available information.
EFFECTS OF OVEREXPOSURE: Direct contact with eyes may cause irritation.
PROBABLE ROUTES OF EXPOSURE: Eyes, inhalation, and ingestion.
EMERGENCY AND FIRST AID PROCEDURES:
EYE CONTACT: Immediately flush eyes with water for at least 15 min. includingunderneath eyelids.
Consult a physician if irritation persists.
SKIN CONTACT: Non-irritant; wash from skin.
INHALATION: Not established. Not expected to be harmful.
CARCINOGENICITY: Not applicable.
OTHER PERTINENT DATA: Not applicable.
SECTION VII - TOXICITY DATA
ORAL: Acute Oral Toxicity: Ld50
(rat) >
5000 mg/kg
DERMAL: Not established, not
expected to be
harmful.
May
be irritating with continual contact.
INHALATION: Not established. Not
expected to
be
harmful.
If necessary, use respirator if adequate ventilation is not possible to
keep exposure to particulate matter at a minimum.
OTHER PERTINENT DATA: Not
applicable.
SECTION VIII -
SPECIAL
PROTECTION
INFORMATION
PERSONAL PROTECTION EQUIPMENT
PROTECTIVE GLOVES: Ordinary
protective work
gloves.
EYE PROTECTION: Safety goggles.
RESPIRATORY PROTECTION (SPECIFY
TYPE): Use
NIOSH
approved
equipment suitable for nuisance vapors when airborne exposure is
necessary.
OTHER PROTECTIVE EQUIPMENT: Wear
easily
washable
clothing.
SECTION IX -
SPILL, LEAK, AND
DISPOSAL
PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL
IS RELEASED
OR
SPILLED:
Confine spilled material and absorb on sand, sawdust, earth or other
available
solids. Sweep and place in a suitable container. Flush with
water and rinse minor spills into sewer if permitted by Federal, State
and local regulations.
WASTE DISPOSAL METHODS: Incinerate
or bury in
a
suitable
land fill where permitted by appropriate government regulations.
CLEAN WATER ACT REQUIREMENTS: Not
applicable.
RESOURCE CONSERVATION AND RECOVERY
ACT (RCRA)
REQUIREMENTS:
No applicable information found.
SECTION X -
REGULATORY
INFORMATION
FDA: No applicable information
found.
USDA: No applicable information
found.
CPSC: No applicable information
found.
TSCA: All components of this product are on the TSCA
Inventory
or are
exempt
from TSCA Inventory requirements.
CEPA (DSL) : All components of
this product are on the DSL inventory or are exempt from
reporting under the New Substances Notification Regulations.
DOT: No applicable information
found.
PROPER SHIPPING NAME: Not
applicable.
HAZARDOUS CLASS: Not applicable.
LABEL REQUIRED: Not applicable.
IDENTIFICATION NUMBER: Not
applicable.
This information is furnished without
warranty,
representation,
inducement or license of any kind, except that it is accurate to the
best
of Flame Seal Products, Inc. knowledge, or obtained from sources
believed
by Flame Seal Products, Inc. to be accurate, and Flame Seal Products,
Inc.
does not assume any legal responsibility for use or reliance upon same.
Customers are encouraged to conduct their own tests. Before using any
product,
read its label.
EFFECTIVE DATE: May 7, 2010
SUPERSEDES: April 6, 2010
|
FABRIC
SEAL™ (N) - MSDS
