|
 
FLAME
SEAL-TB™ - THERMAL BARRIER FOAM COATING
Passed UL-1715 test
specifications at Intertek Laboratory
on Polyurethane
Foam (Less than 18
mils...Thin Film "Paint-On"
Coating)
THE
ABSOLUTE BEST IN FIRE
PROTECTION
TECHNOLOGY ™
|
|
DESCRIPTION: Flame Seal-TB™ (aqueous based resin) is a spray
applied fire protective intumescent coating, which satisfies thermal
barrier / ignition barrier requirements of the IBC code when applied
over Spray Polyurethane Foam (SPF) insulation.
| Total Solids: |
61% - 66% by weight
|
| Weight per
Gallon: |
10.6 lbs.-
11.0 lbs. |
| Specific
Gravity: |
1.28 - 1.33
|
| pH: |
2.5 - 3.5 |
| Flash Point: |
None |
| Color: |
White |
| Coverage: |
65 Square Feet-Gallon
Thermal Barrier: 65 Square Feet per Gallon
Ignition Barrier 125 Square Feet per Gallon |
| Volatility: |
Non-volatile |
| Solvents: |
Water
(Contains no petroleum
derivatives) |
| Toxicity: |
Cured film non-toxic - not harmful to plants or animals.* |
| Fungus
Resistance: |
Good |
| Mold
Resistance: |
Good |
| Bacteria
Resistance |
Mildly
resistant |
| Linear
Shrinkage: |
None |
| Moisture
Absorption: |
None, when fully cured
|
| Corrosive: |
Mildly in liquid form, non corrosive when dry |
Storage
|
Temperature - 40-90ºF
|
Shelf Life
|
9 months from manufacturer batch date stored at proper temperature.
|
*Mixed liquid product contains up to 10 grams/liter of isopropyl alcohol.
RECOMMENDED USE: This product recommended for interior use only. Spray applied fire
retardant coating used as a thermal and/or ignition barrier over Spray
Polyurethane Foam (SPF) insulation. This product is intended for use by
professional applicators only. Do not use this product without obtaining
application instructions and equipment requirement information from Specialty
Products, Inc.
APPLICATION: Mixing and Application Instructions: See written instructions and
video. SPI Flame Seal-TB? technical support phone number (800) 627-0773 or (253)
588-7101.
ENVIRONMENTAL REGULATIONS: : Compliant with FDA/USDA for incidental
food contact. This product complies with U.S. Federal Regulations concerning the
use of lead in paint AND hydrocarbon emissions.
FLAME SEAL-TB™ COATING
is mixed with T50-TB™ CURING
AGENT (both arrive in correct mixture ratios)
PRODUCTS ARE GUARANTEED TO PERFORM THEIR
FIRE RETARDANT FUNCTION AS REPRESENTED BY THIRD PARTY TESTS, IF APPLIED
ACCORDING TO MANUFACTURER?S PUBLISHED INSTRUCTIONS. PRODUCTS MAY NOT BE DILUTED
OR ALTERED PRIOR TO USE. There are no other warrantees either expressed or
implied since Flame Seal Products, Inc. cannot control the actual application of
the products. Users must determine usability and suitability for their
particular requirements, as well as compatibility with the exact materials to be
treated or coated.
Rev 04/01/10
|
|
PRODUCTS ARE GUARANTEED TO
PERFORM THEIR FIRE RETARDANT FUNCTION AS REPRESENTED BY THIRD PARTY TESTS, IF
APPLIED ACCORDING TO MANUFACTURER’S PUBLISHED INSTRUCTIONS. PR8ODUCTS MAY
NOT BE DILUTED OR ALTERED PRIOR TO USE.
There
are no other warrantees either expressed or implied since Flame Seal Products,
Inc. cannot control the actual application of the products. Users must
determine usability and suitability for their particular requirements, as well
as compatibility with the exact materials to be treated or coated.
FLAME SEAL
PRODUCTS, INC. 4025 Willowbend Blvd. # 310, Houston,
Texas, 77025 USA, (713) 668
4291 office, (713) 668 1724 fax, www.flameseal.com
© Copyright of Flame Seal Products, Inc. All rights
reserved, ® Registered Trademark of Flame Seal Products,
Inc., TM
Trademark of Flame Seal Products, Inc |
|
