|
 
FX-100® FIRE
RETARDANT COATING - USED IN AVIATION
THE
ABSOLUTE BEST IN FIRE
PROTECTION
TECHNOLOGY ™
|
|
| Total Solids: |
61 % - 66 % |
| Weight per
Gallon: |
11.3 lbs.-
11.7 lbs. |
| Specific
Gravity: |
1.36 -
1.41 |
| pH: |
1.5 - 2.5 |
| Flash Point: |
None |
| Color: |
Clear When
Dry |
| Coverage: |
150 - 350 Square Feet-Gallon
(7.64 Mils-220 Sq.Ft.Tested) |
| Volatility: |
Non-volatile
|
| Solvents: |
Water
(Contains no petroleum
derivatives) |
| Toxicity: |
Non-toxic |
| Fungus
Resistance: |
Good |
| Mold
Resistance: |
Good |
| Bacteria
Resistance |
Mildly
resistant |
| Linear
Shrinkage: |
None |
| Moisture
Absorption: |
None |
| Corrosive: |
Mildly, none
when dry |
| Storage: |
Temperature - 40-90ºF, (44.4-32.22ºC) |
| Shelf Life: |
1 Year from Manufacturer Batch Date at proper temperature |
RECOMMENDED
USE:
INTERIOR - "FX-100®
FIRE BARRIER COATING" - CLASS A: can be used on many types of porous or non-porous
materials. Application may be accomplished by either brush,
roller, or spray methods. The coverage rate should be 150-350
square feet per gallon, depending upon the results desired. This
product has an extreme level of fire protection due to the formation of
a very thick insulation layering when exposed to fire. It has
been said by one of our customers that “if it will stick to a
given surface, it will protect it from fire”. Some of the uses
are: Wood (raw or painted), Steel, Aluminum, Plastic, etc…
EXTERIOR
- If
used outdoors, paint over the dried
FX-100®
Coating
with an Exterior Latex Paint for long term protection from
weathering. Since there are so many brands and types of
paints, it is suggested that, to confirm compatibility, a spot
test should be performed by coating a small piece of wood with
FX-100®
and paint.
ENVIRONMENTAL REGULATIONS: This
product complies with
U.S. Federal Regulations concerning the use of lead in paint AND
hydrocarbon
emissions.
FX-100® COATING
is mixed with
T-50™ CURING
AGENT (Shipped with correct mixture ratios)
Rev 03/29/2011
PRODUCTS ARE GUARANTEED TO PERFORM THEIR FIRE
RETARDANT FUNCTION AS REPRESENTED BY THIRD PARTY TESTS, IF APPLIED ACCORDING TO
MANUFACTURER’S PUBLISHED INSTRUCTIONS. PRODUCTS MAY NOT BE DILUTED OR
ALTERED PRIOR TO USE.
There are no other
warrantees either expressed or implied since Flame Seal Products, Inc. cannot
control the actual application of the products. Users must determine
usability and suitability for their particular requirements, as well as
compatibility with the exact materials to be treated or coated.
|
|
FLAME SEAL
PRODUCTS, INC. 4025 Willowbend Blvd. # 310, Houston,
Texas, 77025 USA, (713) 668
4291 office, (713) 668 1724 fax, www.flameseal.com
© Copyright of Flame Seal Products, Inc. All rights
reserved, ® Registered Trademark of Flame Seal Products,
Inc., TM Trademark of Flame Seal Products, Inc
|
|