EMERGENCY TELEPHONE NO.: 800-424-9300
PRODUCT NAME: Leather
Seal™ Fire
RetardantCHEMICAL FAMILY:
Aqueous based
fire
retardant.
HMIS CODES:
Health:1,
Flammability:0, Reactivity:0, PPE: B
SECTION I - PRODUCT INFORMATION
MANUFACTURER’S NAME:
FLAME SEAL PRODUCTS INC
4025 WILLOWBEND BLVD. #310
HOUSTON TX 77025 USA
(713) 668 4291
SECTION II -
HAZARDOUS
COMPONENTS
| COMPONENT |
|
ACGIH |
OSHA |
| CAS REGISTRY NO. |
WT. % |
TLV |
PEL |
Sodium Bromide
7647-15-6 |
5% - 10% |
Not Established
|
Not Established
|
Potassium Bromide
7758-02-3 |
1% - 5% |
Not Established
|
Not Established
|
Boric Acid
10043-35-3 |
0.5% - 1.5% |
10 mg/m3
|
Cal OSHA PEL 10mg/m3
Osha PEL (Total Dust) 15mg/m3
Osha PEL (Respirable Dust) 5mg/m3
|
SECTION III -
PHYSICAL
PROPERTIES
APPEARANCE AND ODOR: Clear,
odorless liquid.
MOLECULAR WEIGHT: Not Applicable.
BOILING POINT: (DEGREES
FAHRENHEIT): 212 - N/A
MELTING POINT: (DEGREES
FAHRENHEIT): Not
Applicable.
VAPOR PRESSURE: (mm of
Mercury): Not
Determined.
SPECIFIC GRAVITY:
(WATER=1):
1.06
–
1.10
VAPOR DENSITY: (AIR=1):
Aqueous mixture
not
determined.
PERCENT VOLATILE: (BY
WEIGHT): 88% max.
(water content only)
pH: 3.0 - 5.0
SOLUBILITY IN WATER:
Complete.
EVAPORATION RATE: (BUTYL
ACETATE=1): Not
Determined
<1 (slower).
STORAGE:
Temperature- 40-90°F,
(4.44°C-32.22°C) , Time – 1 Year from Manufacturer Date SECTION IV - FIRE AND EXPLOSION
DATA
FLASH POINT (DEGREES FAHRENHEIT:
PENSKY-MARTENS
CLOSED
CUP): None to boiling.
FIRE EXTINGUISHING MEDIA:
Not
combustible. Use
water
spray, fog, foam, dry chemicals, CO2, or other agents as
appropriate
for material in surrounding fire.
FLAMMABLE LIMITS (PERCENT BY
VOLUME):
Not
applicable.
SPECIAL FIRE FIGHTING PROCEDURES
AND
EQUIPMENT:
Not combustible.
UNUSUAL FIRE AND EXPLOSION
HAZARDS: None
HAZARDOUS COMBUSTION
PRODUCTS: Exposure
to
high
heat and / or combustion may cause liberation of traces of
ammonia.
SECTION V - REACTIVITY DATA
STABILITY:
STABLE ___X___
UNSTABLE _______
CONDITIONS TO AVOID: Mixing &
strong
bases/
Mixing
with incompatible materials.
INCOMPATIBILITY (MATERIALS TO
AVOID): Strong
bases
may
emit ammonia gas.
HAZARDOUS DECOMPOSITION PRODUCTS:
In the dry
state,
nitrogen
oxides, ammonia or hydrogen bromide may be formed in the presence of
fire.
HAZARDOUS
POLYMERIZATION:
Will Occur _______
Will Not Occur ___X___
SECTION VI - HEALTH HAZARD
INFORMATION
EXPOSURE FROM ROUTINE USE: No
evidence of
adverse
effects
from available information.
EFFECTS OF OVEREXPOSURE: EYES. . .
Direct
contact
with
eyes may cause irritation.
PROBABLE ROUTES OF EXPOSURE:
Eyes,
inhalation,
and
ingestion.
EMERGENCY AND FIRST AID PROCEDURES:
EYE CONTACT:
Immediately
flush
eyes
with water for at least 15 min. including underneath eyelids. Consult a
physician if irritation persists.
SKIN
CONTACT:
Non-irritant;
wash
from skin.
INHALATION: Not
established.
Not expected to be harmful.
CARCINOGENICITY: Not
applicable.
OTHER PERTINENT
DATA:
Not
applicable.
SECTION VII - TOXICITY DATA
ORAL: Acute Oral
Toxicity: Ld50
(rat)
> 5000
mg/kg
DERMAL: Not
established, not
expected to
be
harmful. May be irritating with continual contact.
INHALATION: Not
established. Not
expected
to be harmful. If necessary, use respirator if adequate ventilation is
not available to keep exposure to particulate matter (dry) or mist
(wet)
at a minimum.
OTHER PERTINENT DATA:
Not
applicable.
SECTION VIII - SPECIAL PROTECTION
INFORMATION
PERSONAL PROTECTION EQUIPMENT
PROTECTIVE
GLOVES:
Ordinary
protective work gloves.
EYE
PROTECTION:
Safety
goggles.
RESPIRATORY
PROTECTION
(SPECIFY
TYPE):
Use NIOSH approved equipment suitable for nuisance vapors when airborne
exposure is necessary.
OTHER PROTECTIVE EQUIPMENT: Wear easily washable clothing.
SECTION IX - SPILL, LEAK, AND
DISPOSAL
PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL
IS RELEASED
OR
SPILLED:
Confine spilled material and absorb on sand, sawdust, earth or other
available
solids. Sweep and place in a suitable container. Flush with water and
rinse
minor spills into sewer if permitted by Federal, State and local
regulations.
WASTE DISPOSAL METHODS: Incinerate
or bury in
a
suitable
land fill where permitted by appropriate government regulations.
CLEAN WATER ACT REQUIREMENTS: Not
applicable.
RESOURCE CONSERVATION AND RECOVERY
ACT (RCRA)
REQUIREMENTS:
No applicable information found.
SECTION X - REGULATORY INFORMATION
FDA: No applicable information
found.
USDA: No applicable information
found.
CPSC: No applicable information
found.
TSCA:
All components of this product are on the
TSCA Inventory or are exempt from TSCA Inventory requirements.
CEPA (DSL) : All components of this product are on the DSL inventory or are
exempt from
reporting under the New Substances Notification Regulations.
DOT: No applicable information
found.
PROPER SHIPPING
NAME: Not
applicable.
HAZARDOUS
CLASS: Not
applicable.
LABEL REQUIRED:
Not
applicable.
IDENTIFICATION
NUMBER: Not
applicable.
This information is furnished without
warranty,
representation,
inducement or license of any kind, except that it is accurate to the
best
of Flame Seal Products, Inc. knowledge, or obtained from sources
believed
by Flame Seal Products, Inc. to be accurate, and Flame Seal Products,
Inc.
does not assume any legal responsibility for use or reliance upon same.
Customers are encouraged to conduct their own tests. Before using any
product,
read its label.
EFFECTIVE DATE:
May 7, 2010
SUPERSEDES:
April 6, 2010 |