Flame Retardant - Fabric Seal Concentrate Application  FABRIC FIRE RETARDANT SPRAY - APPLICATION
     Public Stock : F L M P                 CONCENTRATE DILUTION and APPLICATION INSTRUCTIONS

                     | Home | ProductsTesting  | MSDS List | Prices Stock News | Media | Sales Contacts |
FABRIC SEAL  ™  CONCENTRATE by Flame Seal ®
FIRE RETARDANT APPLICATION DIRECTIONS

Mix Before Use : UNKNOWN FABRIC BLENDS: Test small strips of the fabric with different mixtures of our flame retardant and treat as follows:

1. Dip a piece of dry, clean fabric cloth in a 3-1 mixture of  Water to  Fabric Seal Retardant Concentrate and dry.
2. Hold the fabric vertically.  Place the flame of a match next to one edge of the vertical piece for 12 seconds.  It will blacken where the flame was.  Remove the match.  If it does not sustain a flame or smoke excessively when the match is removed, this is the mixture to use.  Check for color fastness.  If this does not work do Step 3.
3. Dip another piece of the fabric in a 2-1 mixture of Water to  Fabric Seal Retardant Concentrate and let dry.  Test with flame as in Step 2.  If that does not work, then go to step 4.
4. Dip another piece of the fabric in a 1-1 mixture of Water to  Fabric Seal Retardant Concentrate.    Test as in Step 2.
5. Retreatment is recommended after three (3) dry cleanings or one (1) machine washing with water. 
 
Mix Water to Chemical  (Example: 3-1 is 3 parts water, 1 part chemical.) 
 
MIX  PARTS 
WATER  TO  FABRIC SEAL 
CONCENTRATE
1. "NATURAL FIBERS"
(SILK :  DO NOT TREAT SILK DUE TO WATER STAINS)
COTTON
  3-1, or 2-1
.
2. "NATURAL + SYNTHETIC BLENDS"

 COTTON+POLYESTER
  2-1 or 1-1
 RAYON / RAYON+POLYESTER
  2-1 or 1-1
.
3. "SYNTHETICS"
100% POLYESTER
  1-1
NYLON OR BLENDS CONTAINING NYLON
1-1 or Up to full strength


FABRIC SEAL™  INDUSTRIAL APPLICATION TIPS - An Overview


 
DIRECTIONS:

1. ITEMS TO BE TREATED MUST BE CLEAN AND DRY.

2. TREAT A SMALL SECTION OF MATERIAL TO TEST FOR COLOR FASTNESS.

3.  MIST BOTH SIDES OF MATERIAL IF POSSIBLE.  MAKE SURE TO MIST ALL SIDES OF ANY FOLD IN THE MATERIAL.

( IF MATERIAL DOES NOT ABSORB CHEMICAL ADD 1/2 - 1 OUNCE OF CLEAR IVORY DISHWASHING LIQUID TO ONE QUART OF FIRE RETARDANT.  MIX WELL JUST PRIOR TO USE.  THE IVORY WILL ACT AS A SURFACTANT AND WILL HELP THE FABRIC ABSORB MORE EASILY.)

4. ALLOW AMPLE TIME TO DRY.

5. RETREATMENT IS RECOMMENDED AFTER THREE (3) DRY CLEANINGS OR ONE (1) MACHINE WASHING WITH WATER.

6. USE PRODUCT IN AREA WITH ADEQUATE VENTILATION.

(COVERAGE RATE IS APPROXIMATELY 300 SQ. FT. PER GALLON )
 
CAUTIONS:

1. STORE OUT OF REACH OF CHILDREN.

2. IF SWALLOWED, GIVE LARGE QUANTITIES OF WATER.   CALL A PHYSICIAN.

3. IN CASE OF EYE CONTACT, FLUSH THOROUGHLY WITH WATER FOR 15 MINUTES.

4. USE WITH ADEQUATE VENTILATION.

5. MAY BE IRRITATING TO SENSITIVE SKIN.


 (No  PBDEs - Polybrominated diphenyl ethers)


PRODUCTS ARE GUARANTEED TO PERFORM THEIR FIRE RETARDANT FUNCTION IF APPLIED ACCORDING TO MANUFACTURERS INSTRUCTIONS.

® Registered in US Patent and Trademark Office     ™  Trademark of  FLAME SEAL PRODUCTS INC.  
 (Non Toxic, Non Hazardous, No  PBDEs - Polybrominated diphenyl ethers)

ADDRESS:    FLAME SEAL PRODUCTS, INC.    4025 Willowbend Blvd. # 310, Houston, Texas, 77025 USA,  (713) 668 4291 office, (713) 668 1724 fax,     Website: www.flameseal.com  Email: flameseal@flameseal.com

PRODUCTS:  
BARRIERS: | FBS Wrap -Cables, Conduits, Flanges | FBS Panel -Walls |
LIQUIDS:     | WoodLeatherFabric | Coating | Plastic | PaperWild Fire Coating |
GENERAL   | Prices | Product Description | Products | Testing Info | MSDS Index  | In the Lab - NEW PRODUCTS ! | Privacy Policy |
( Investment: | Stock News | Transfer Agent | )