 FIRE RETARDANT PAINT TYPE COATING
FOR SOLID SURFACESPublic Stock : F L M P | Home | Products | Testing | MSDS List | Prices | Stock News | Media | Sales Contacts | FX-100®
Fire Retardant Coating
used in Aviation:
"Expands 100 times the coating thickness ! Water Based - Non Toxic
RECOMMENDED USE: "FX-100® FIRE BARRIER COATING" - CLASS A: INTERIOR - FX-100® Fire Protective Coating
- Class A can be used on many types of porous or non-porous
materials. Application may be accomplished by either brush,
roller, or spray methods. The coverage rate should be 150-350
square feet per gallon, depending upon the results desired. This
product has an extreme level of fire protection due to the formation of
a very thick insulation layering when exposed to fire. It has
been said by one of our customers that “if it will stick to a
given surface, it will protect it from fire”. Some of the uses
are: Wood (raw or painted), Steel, Aluminum, Plastic, etc…
EXTERIOR - If used outdoors, paint over the dried FX-100® Coating with an Exterior Latex Paint for long term protection from weathering. Since there are so many brands and types of paints, it is suggested that, to confirm compatibility, a spot test should be performed by coating a small piece of wood with FX-100® and paint. ENVIRONMENTAL REGULATIONS: This product complies with U.S. Federal Regulations concerning the use of lead in paint AND hydrocarbon emissions. FX-100® COATING is mixed with T-50™ CURING AGENT (both come with order in correct mixture ratios)
® Registered in US Patent and Trademark Office ™ Trademark of FLAME SEAL PRODUCTS INC. Rev. 3-12-08 (Non Toxic, Non
Hazardous, No
PBDEs - Polybrominated diphenyl ethers)
|
