Fire Retardant 2 For Leather Tanneries

LEATHER SEAL™2

FIRE RETARDANT 2 FOR LEATHER TANNERIES

Leather Seal™ 2 Flame Retardant
DESIGNED FOR TANNERIES
( Versions: Leather Seal™ 2, Leather Seal™ 3, Leather Seal ™ Concentrate )

Water Based - Non Toxic
(No PBDEs - Polybrominated diphenyl ethers)
pH Adjustment from regular Leather Seal™ Fire Retardant

Total Solids:	14 % -15 %
Weight per Gallon	8.9 lbs - 9.2 lbs.
Specific Gravity:	1.07 - 1.11
pH:	3.0 - 5.0
Flash Point:	None
Color:	Semi Clear (Does not affect color)
Coverage:	100 -150 Square Feet per Gallon
Volatility:	Non-Volatile (Contains no VOC's)
Solvents:	Water (Contains no petroleum derivatives)
Toxicity:	Non-toxic
Fungus Resistance:	Excellent
Mold Resistance:	Excellent
Bacteria Resistance:	Mildly resistant
Linear Shrinkage:	None
Moisture Absorption:	None
Corrosive:	Mildly, none when dry

Not Harmful to Plants or Animals

RECOMMENDED USE: INTERIOR - Leather Seal™ 2 Fire Retardant was designed for Leather Tanneries. Go to Leather Seal™ Fire Retardant if you are not a tannery.

Leather Seal™ 2 Fire Retardant is a spray applied product designed for use on leather upholstery. Spray on the unfinished side of the leather at approximately 100-150 square feet per gallon. Allow to air or force dry.

Leather Seal™ 2 offers a 10-15% increase in efficiency compared to the original product, plus adjustments to the pH and formulation that eliminate conflicts with most dyes & other tanning process chemicals. (As verified in tests performed by clients in our pilot test program.)

ENVIRONMENTAL REGULATIONS:
This product complies with U.S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.

EXCLUSIVE INDUSTRIAL SALES AGENT:	Site: www.atlasrefinery.com Email: info@atlasrefinery.com Phone: 973 589 2002 Fax: 973 589 7377
TESTS :	.
1. FAA FAR 25.853 60 sec.	(Federal Aviation Administration)
2. MVS No. 302	(Motor Vehicle Safety Standard)
3. UFAC	(Upholstered Furniture Action Council)
4. California Tech. Codes #117	(Upholstery for State of California)
MSDS - Chemical Properties and Safety: (No PBDEs - Polybrominated diphenyl ethers)	LEATHER SEAL™ 2 MATERIAL SAFETY DATA SHEET
APPLICATION:	APPLICATION DIRECTIONS

^{®
Registered in US
Patent and Trademark Office ™ Trademark
of FLAME SEAL PRODUCTS INC.}
(No PBDEs - Polybrominated diphenyl ethers)

Manufacturer Address: :
FLAME SEAL PRODUCTS, INC. 4025 Willowbend Blvd. # 310, Houston, Texas, 77025 USA, (713) 668 4291 office, (713) 668 1724 fax, website : www.flameseal.com, email: flameseal@flameseal.com