FlameSeal RGTM

Introduction

Flame Seal-RG™ (Rubber Guard) is a two-part coating system designed for use as a Class A fire retardant coating over shredded rubber media. Flame Seal-RG™ was tested under the ASTM E-108-11 method. When Flame Seal-RG™ is exposed to fire or extreme heat, a protective layer of Carbon Foam develops and prevents the fire and heat from transferring to the shredded rubber media. Flame Seal-RG™ comes in White or Black. Flame Seal RG™ is a commercial product installed by professionals in the rubber berm trap industry. Please contact Flame Seal Products for information on RG™ partners.

RG Documents

Data Sheet

SDS

Testing Matrix

Products Test Methods Classification Coverage
Flame Seal RG™ ASTM E-108-11 Class A 65 ft2per gallon

Application Instructions

Flame Seal-RG™ is a two-part system (4:1 ratio) packaged in 5-gallon kits. This packaging configuration allows the cross linker to be mixed directly into the resin container prior to use. Once Flame Seal-RG™ is well mixed the product can be applied via airless spray equipment. The product, after mixing, has a pot-life of 1-2 hrs. Details can be found on the product label. Products may not be diluted or altered prior to use.

FAB

Features

  • Two Part Coating
  • Comes in White or Black
  • Safe Handling
  • Proprietary Ingredients

Advantages

  • Non-Toxic
  • Colorless
  • Non-staining
  • Inert
  • Non-conductive
  • Neutral Charge
  • No PDBE’s
  • Decrease Fire and Smoke Evolution

Benefits

  • Substrate Converts to Carbon Char
  • No Flame Propagation
  • Simple Application
  • Non-toxic
  • No Halogen Donor Required

Back to top

Your Name (required)

Company Name (required)

Your Email (required)

Industry (required)

Your Message

$(.header-leather-concentrate).backstretch([ "http://dl.dropbox.com/u/515046/www/outside.jpg" , "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg" , "http://dl.dropbox.com/u/515046/www/cheers.jpg" ], {duration: 3000, fade: 750});