Wood Fire Retardant - Class A Liquid

WOOD FIRE RETARDANT LIQUID
Public Stock : F L M P

Wood Seal-A^™-
CLASS A -Fire Retardant Penetrant
Water Based - Non Toxic
(No PBDEs - Polybrominated diphenyl ethers)

Total Solids:	40 % - 45 %
Weight per Gallon:	9.8 lbs - 10.2 lbs
Specific Gravity:	1.18 - 1.23
pH:	2.0 - 3.0
Flash Point:	None
Color:	Clear to Slightly Cloudy
Coverage:	150-350 Square Feet - Gallon
Solvents:	Water, Isopropanol
Toxicity:	Non-toxic
Fungus Resistance:	Excellent
Mold Resistance:	Good
Bacteria Resistance:	Mildly resistant
Linear Shrinkage:	None
Moisture Absorption:	None
Corrosive:	Mildly, none when dry

Not Harmful to Plants or Animals

RECOMMENDED USE: INTERIOR - Wood Seal^™ Fire Retardant - Class "A" penetrant can be used on any type of unpainted wood and many other cellulose materials. Paint or stain can be applied over the treated material.* Application may be accomplished by either brush, roller or spray methods. The coverage rate should be 150-350 square feet per gallon, depending upon the results desired. This product may be used on materials such as: Fir, Cedar, Redwood. Pine, Straw, Paper/Cardboard, Wall Coverings, etc. Wood Seal^™application is acceptable for use Outdoors when the product is protected from rain and moisture.

EXTERIOR - If the wood surface will be exposed to water - a non-flammable paint or coating* should be applied as a topfcoat after Wood Seal^™ has dried.

ENVIRONMENTAL REGULATIONS: This product complies with U.S. Federal Regulations concerning the use of lead in paint AND hydrocarbon emissions.

* Make sure that a paint or coating is not flammable, and does not negatively effect the fire resistant properties of the Flame Seal product.

*Wood Seal^™ Fire Retardant* :	.
APPLICATION:	INSTRUCTIONS
PRICE:	PRICE PAGE
TESTS:	ASTM E-84 Steiner Tunnel Test Class A (Free Adobe .pdf Reader on web)
MSDS - Chemical properties and safety: (No PBDEs - Polybrominated diphenyl ethers)	MSDS PAGE - MATERIAL SAFETY DATA SHEET

® Registered in US Patent and Trademark Office ™ Trademark of FLAME SEAL PRODUCTS INC .
(Non Toxic, Non Hazardous, No PBDEs - Polybrominated diphenyl ethers) Rev 01-30-08

ADDRESS: FLAME SEAL PRODUCTS, INC. 4025 Willowbend Blvd. # 310, Houston, Texas, 77025 USA, (713) 668 4291 office, (713) 668 1724 fax, Website: www.flameseal.com Email: flameseal@flameseal.com