ADH-1TM

Introduction

ADH-1™ is an economical, moisture-resistant, non-flammable, non-halogenated latex primer/tie coat for use with multiple of  Flame Seal’s coatings products. A thin (1-2 wet mils) application of ADH-1™ enhances adhesion between the above mentioned topcoats and hard-to- adhere-to surfaces – such as plastics and metals. Better adhesion, translates to better durability and coating performance. ADH-1™ is currently being used in both the construction and aerospace industries.

ADH-1 Documents

Data Sheet

SDS

Application Instructions

Application may be accomplished by brush, roll, or spray methods. The coverage rates are dependent upon the end application, and thinner application will equate to a faster drying time. The recommended application rate is between 400 and 800 ft² per gallon. For exterior applications, coat with a compatible waterbased coating and/or a suitable barrier to cover the adhesive prior to exposure to the elements.  ADH-1™ can be used as a fire retardant additive in various adhesive systems.

Back to top

Your Name (required)

Company Name (required)

Your Email (required)

Industry (required)

Your Message

$(.header-leather-concentrate).backstretch([ "http://dl.dropbox.com/u/515046/www/outside.jpg" , "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg" , "http://dl.dropbox.com/u/515046/www/cheers.jpg" ], {duration: 3000, fade: 750});